Terms & Conditions
- In these conditions “Ion” means Ion Glass Limited of Unit 16, More House Farm, Wivelsfield, West Sussex, RH17 7RE and its successors in title or assigns. “Customer” means the person, organisation or Company placing an Order with Ion.
- Orders
All orders are accepted based on these terms and conditions, which will apply even if the customer has different terms, unless Ion agrees in writing to something else. By accepting any order or estimate from Ion, the customer agrees that any other terms they try to include (or change) will not apply unless Ion specifically agrees to them in writing.
Consequently, whenever you place an order with Ion, it creates a binding agreement that includes these terms and conditions—whether you actively accept them or not.
- Bespoke Products and Customer Requirements
Due to the bespoke nature of Ion’s products and services, it is not always possible to specify every detail on a quotation, estimate or order confirmation. Ion’s understanding of the Customer’s requirements will be as detailed in the quotation, estimate and/or drawings supplied.
It is the customer’s responsibility to thoroughly check all documentation provided by Ion – in accepting Ion’s drawings, the Customer is deemed to have accepted Ion’s interpretation of their requirements. They will not be entitled to reject the goods or services.
- Cancellation or delay
Cancellation of any Order will only be accepted without charge provided no work has been done nor any special materials ordered which cannot be cancelled without cost to Ion. Any work performed prior to cancellation shall be chargeable on a quantum meruit basis. Cancellation shall not be permitted in respect of any order that has been substantially completed. Once a deposit has been paid any refund to the Customer is at Ion’s discretion, in relation to the level of work already undertaken and potential impact of the cancellation on work flows and the potential loss of profit.
a) In the event that a confirmed installation date is cancelled or amended and Ion has taken delivery of glass on behalf of the Customer, storage charges will start from that date on a full monthly basis. The goods are stored at the risk of the Customer. The storage fee is variable depending on the quantity and size of the goods in question.
b) Should a confirmed installation date be cancelled by the Customer with less than 48 hours notice (excluding weekends) for any reason outside of the control of Ion Glass, including issues on site caused by others, this will be chargeable at the rate of £540 per man per day up to a maximum of five days. Any additional expenses incurred relating to the agreed work (such as non-refundable travel, hotel costs, crane hire or other logistics) will be charged at cost plus a 20% administration fee.
c) In the event that we have to abort an installation for any reason outside the control of Ion Glass, this will be chargeable at the rate of £540.00 per man per day or part day during normal working hours
d) In the event that a confirmed and scheduled installation date is delayed by more than 30 days, Ion Glass reserves the right to render a further invoice up to 85% of the project value. If so required Ion will present a vesting certificate and photographs of goods in storage.
- Customers credit
Ion reserves the right to refuse to enter into a contract with any customer whose creditworthiness is not approved by Ion. If a contract is made before Ion has completed its standard credit checks, and those checks later prove unsatisfactory, Ion reserves the right to cancel the contract or to request full payment in advance.
The customer acknowledges that, in the event of such cancellation, Ion shall have no legal or other liability to the customer, the customer’s subcontractors, or any third party as a result.
- Terms of Estimate or Quotation
Unless expressly stated otherwise, any estimate or quotation provided is valid only if accepted in writing by the Customer within sixty (60) days of the date of issue and is subject to survey. Ion reserves the right to withdraw or amend the estimate or quotation at any time prior to acceptance, without notice.
Any waiting time, additional expenses, extra visits, or overtime that is requested, instructed, or required by others for any reason shall be charged separately and in addition to the original estimate or quotation.
If Ion has to pay extra costs for labour or transport beyond what was included in the estimate due to circumstances beyond their control, or caused by others, Ion has the full right to increase the contract price by the amount of those additional costs.
- Prices
Unless an estimate has been given by Ion and accepted under the terms of condition 3:
(i) Prices charged will be those ruling at the day of delivery of the goods
(ii) Prices are issued subject to review without prior notification
(iii) All products are sold subject to V.A.T. at the rate chargeable at the day of delivery
7. Deliveries
(i) Delivery dates are given in good faith but are approximate only and no liability will be accepted in event of late delivery.
(ii) Delivery will normally be made by Ion to the project. Depending on the site location Ion reserves the right to make or pass on additional delivery charges, which will be notified.
(iii) All goods should be examined by the Customer immediately upon receipt. The signature by the customer or its employee, or agent on the delivery note will be deemed to constitute acceptance by the customer of the goods in good condition and conforming in all respects with the order. Should any defect be found to the glass, Ion must be notified in writing within three days of the delivery.
8. Scaffolding & crane hire
Any necessary scaffolding will be provided by the Customer, at its own expense, to enable the work to be carried out safely and in accordance with any statutory provision, regulation, order or bye-law. Any necessary documentation will be made available to Ion.
Scaffold towers such as may be required will generally be included within Ion’s quotation/estimate.
Crane hire (if required) is not included in the quotation and will be charged with the final invoice at cost plus a 20% administrative fee. Should the Customer wish to arrange crane hire independently Ion must be informed with seven days of order confirmation.
9. Payment
a) Once an order is placed the required deposit (as noted on your costing) becomes immediately due. No work will be initiated without the deposit.
b) Where estimates or orders provide for the manufacture, delivery or installation of goods Ion will raise an invoice on delivery (or on notice that the goods are available for collection by the Customer) or on completion of the installation. Payment is due as noted on the invoice but in any event, within a maximum of 7 days of the date of issue.
c) If any invoice is not paid on the due date all other invoices raised by Ion against the Customer will be deemed to be due and become immediately payable in full. Ion reserves the right to charge interest on any overdue invoices at the rate of 2.5% per month on the amount then outstanding. In the event of proceedings being issued for non-payment of overdue invoices the Customer will be charged for all goods manufactured which will remain on Ion’s premises and incur storage charges until all outstanding payments have been received.
d) If goods are not able to be received by the Customer within one month after the invoice is issued Ion reserves the right to charge a storage fee on a full monthly basis. The goods are stored at the risk of the Customer. The storage fee is variable depending on the quantity and size of the goods in question.
10. Property and Risk
a) Risk
The risk of loss or damage to the goods passes to the Customer as soon as the goods are installed.
b) Ownership
The Customer will only become the legal owner of the goods once Ion has received full payment for all goods supplied under the relevant order, including any applicable interest. Until full payment is made, the Customer must not use the goods or do anything with them that is inconsistent with Ion’s ownership.
If the Customer sells the goods—whether in their original form, after modification, or as part of another product—the Customer holds the proceeds of that sale in trust for Ion until Ion has been fully paid.
- Liability
To the fullest extent permitted by law, Ion accepts no liability for any breach of statutory duty or for negligence. If any goods are found to have defects due to Ion’s workmanship, Ion’s responsibility is strictly limited to either repairing or replacing the defective goods. Alternatively, where appropriate, Ion may choose to refund the Customer a fair proportion of the purchase price relating to the defective goods.
Beyond this, Ion will have no further liability to the Customer. In particular, Ion will not be responsible for any indirect or consequential losses that result from the defective goods.
12. Warranty
a) Ion guarantees that, upon delivery, the goods will match the specifications and description set out in Ion’s quotation/estimate or the Customer’s order, subject to any changes agreed in writing between Ion and the Customer. The goods will also comply with any printed warranty provided by Ion that applies to the type of goods ordered and is current at the date of the order.
However, Ion does not provide any warranty or accept any liability in the following situations:
(i) If any defects are caused by drawings, designs, materials, or specifications provided by the Customer.
(ii) If defects result from normal wear and tear, intentional damage, negligence, failure to follow Ion’s written or verbal instructions, misuse, or any changes made without Ion’s approval.
(iii) If the total payment for the goods has not been made by the due date.
b) Ion provides a one-year warranty on all glass installations. Further details are set out in Ion’s separate warranty document.
c) If the Customer believes the goods are defective or do not meet the required specifications, the Customer must notify Ion in writing within three (3) days of delivery. This applies whether or not the Customer refuses delivery. If the Customer accepts delivery and does not notify Ion within this period, the Customer will lose the right to reject the goods, and Ion will not be responsible for any defects. In that case, the Customer must pay for the goods as if they fully complied with the order.
d) Ion is not responsible for minor marks, streaks, or blemishes that naturally occur during the glass manufacturing or bending process. If a complaint about glass quality is made, Ion will refer the issue to the glass manufacturer. Any credit approved by the manufacturer after inspection will be passed on to the Customer. The manufacturer’s decision will be final and binding on both Ion and the Customer.
e) Except as specifically stated in these terms, Ion is not liable to the Customer for any indirect or consequential loss or damage (including loss of profit), costs, or claims caused by negligence or otherwise in connection with the supply, use, or resale of the goods. This exclusion of liability does not apply to death or personal injury caused by Ion’s negligence.
The Customer’s own materials will be handled with care by Ion but are only accepted at the risk of the Customer. Glass supplied by the Customer for toughening will be processed entirely at the Customers own risk and will be charged for each piece supplied and processed, even if an item is broken during the toughening process.
- Product Modifications
Ion reserves the right to make any modifications or improvements to its products as it considers necessary, without giving prior notice to the Customer.
Any such modifications or improvements will not give the Customer the right to reject any updated or modified products, or any products that were supplied by Ion before those modifications or improvements were made.
- Conflict
a) Conflicting Terms
If there is any conflict between Ion’s contract terms and the contract terms of the Customer, or those of any other supplier, sub-contractor, or agent acting for the Customer, it is expressly agreed that Ion’s terms and conditions will take priority and apply in all circumstances.
b) Payment Protection
If the Customer receives any payments, including interim payments, under contracts that involve goods or products supplied by Ion (either in whole or in part), then—at Ion’s written request—the Customer must hold an amount equal to the value or quoted price of those goods in a separate, designated bank account, held on trust for Ion.
c) Governing Law
These terms and conditions shall be governed by and interpreted in accordance with English law. Both Ion and the Customer agree that any disputes or disagreements arising between them will be subject to the jurisdiction of the English courts.
d) Legal Costs
The Customer agrees to reimburse Ion for all legal fees and other costs reasonably incurred by Ion in enforcing its rights under these terms and conditions.
Tolerances and Standards
Dimensional tolerances
A tolerance of +/- half of the thickness of the glass to a maximum of +/- 6mm is required by Ion in accordance with industry standards. We cannot accept a claim outside the agreed dimensional tolerances.
Visual quality criteria for flat single-panel heat-treated & toughened glass, flat single-panel toughened and laminated glass, double-glazed units incorporating either or both of these glasses and curved glass of any makeup.
As used by the Glass and Glazing Federation and accepted as the standard for the inspection of heat-treated glass, Ion Glass products to be inspected using the same criteria:
- Both panes of the sealed unit shall be viewed at right angles to the glass from the room side standing at a distance of not less than 2 metres (but for toughened, laminated or coated glasses not less than 3 metres) in natural daylight and not in direct sunlight with no visible moisture on the surface of the glass. The area to be viewed is the normal vision area with the exception of a 50mm wide band around the perimeter of the pane or unit.
- Flat transparent glass, including laminated or toughened glass, shall be deemed acceptable if the following phenomena are neither obtrusive nor bunched: totally enclosed seeds, bubbles or blisters; hairlines or blobs; fine scratches not more than 25mm long; minute embedded particles. Obtrusiveness of blemishes shall be judged by looking through the glass, not at it, under lighting conditions as described in
- When thermally toughened glass is viewed by reflection, the effect of the toughening process may be seen under certain lighting conditions. The visibility of the surface colouration or patters does not indicate deterioration in the physical performance of the toughened glass. Because of the nature of the toughening process, distortion will be accentuated when the glass is viewed in reflection or incorporated in insulating glass units
- Visible double reflection can occur under certain lighting aspect conditions, especially when viewed from an angle. This is an optical phenomenon arising from multiple surface reflections in sealed units.
- The manufacture of flat laminated glass does not usually affect the visual quality of the glass incorporated in insulating glass units. However the faults generally accepted in paragraph 2 may be increased in number if several glasses and interlayers are used in the production of laminated glass. When viewed under certain light conditions, insulating glass units incorporating clear or tinted flat laminated glass may show a distortion effect caused by reflection on the multiple surfaces of the components of the laminated glass.
- Brewster’s Fringes
The appearance of the optical phenomenon known as Brewster’s Fringes is not a defect of the glass and can occur with any glass of high optical and surface quality. This phenomenon is a result of the high quality now being achieved worldwide by modern methods of glass manufacture. Brewster’s Fringes occur if wavelengths of light meet up with each other when they are exactly 180º out of phase – an example of the phenomenon known to physicists as the interference of light. The effect is similar to, although usually much smaller than the interference fringes which can sometimes be seen on toughened glass windscreens.
Brewster’s Fringes occur when the surfaces of the glass are flat and the two panes of glass are parallel to each other, i.e. when the light transmission properties of the installation are of a very high order. This phenomenon is not a defect of the product, being dependent on the laws of physics and not on the quality of the insulating glass. In fact it arises because modern glass made by the float process is flat and free of the distortion inherent in sheet glass.
The occurrence of Brewster’s Fringes is in its nature rather like (though very much more than) the fact that under certain conditions, the observer will see a reflection of himself in any window or door and no-one could claim that this was a defect of glass.
NOTE: Patterned Glass – the above criteria do not apply to patterned glass as, due to the method of manufacture, imperfections such as seeds, bubbles are deemed to be acceptable.
- Roller Wave
Roller wave is an optical phenomenon, generally noticed in reflection, caused by hot glass sagging between rollers in the horizontal toughening process. Also referred to as ‘banding’, ‘corrugation’ or ‘wiggle’ this is a phenomenon that is considered acceptable within defined industry standards. Ref: GGF Datasheet 4.4
- Anisotropy
Anisotropy is a natural consequence of the tempering or heat-strengthening process, rather than a flaw.
- Curved toughened glass
The glass will be toughened to a similar standard as BS 6206 Class A but no standard exists for curved toughened glass. Glass will be marked with the manufacturers toughening stamp and/or heat soak testing stamp as appropriate. The mark to be on each glass panel usually near a corner.
- Curved shape capability
Rectangles and simple rakes. All tolerances will vary depending on complexity of shape.
- Edge condition
Smooth ground edges giving a flat profile with small ground arris. Shells or chips at edges will be ground out prior to toughening and do not constitute reason for rejection. Corners may be dubbed. Some variation in edgework may be discernible on exposed edges where different machine and/or hand forming is a requirement for manufacture. Such variations shall be kept to a minimum
Viewing area
- Scratches and sleeks not visible from 2 metre viewing distance acceptable.
- Bubbles and inclusions not greater than 2.0mm at least 150mm apart acceptable.
- Occasional white scars near to edge zone acceptable.
Critical area
- Fine scratches and sleeks not visible from 2 meters acceptable.
- Bubbles and inclusions up to 1.5mm at least 150mm apart acceptable.
- No white scars permitted.
The Customer agrees that all limitations and conditions in this agreement are reasonable under the Unfair Contract Terms Act 1977 (and any later versions of that law), considering the nature of glass products. Acceptance of any Ion Glass quotation or estimate is deemed acceptance of the above Terms and Conditions.
