Skip to content

Structural Glass Rooflights, Sussex

“Repair, replacement and upgrade projects such as this have become an increasing element of Ion Glass’ remit, cementing our reputation for high quality, fully functional and fully compliant installations. The owner was delighted with the new structural glass rooflight which is safe, robust and fully weatherproof – without the worrying risk of failure inherent in the previous standard double-glazed installation.”.

A homeowner in West Sussex had experienced a failure issue with a double-glazed rooflight and needed to replace the entire span of the installation with a structural glass upgrade.

Overview

A structural glass rooflight at second floor height comprised of a series of structural double-glazed units set into a perimeter frame.

This relatively new home in Brighton benefitted from a double-height space with a substantial rooflight that flooded the interior ground floor and mezzanine floor with natural light.  Unfortunately the inner pane of one of the standard double-glazed units originally used to create the rooflight had spontaneously failed, showering glass onto the floor below.

The owners approached Ion Glass to provide a structural glass upgrade, replacing all the standard double-glazing to prevent a similar failure and potential accident in the future. Whilst no-one had been hurt in the original incident the risk of injury if it happened again was high.

The replacement structural glass rooflight comprised of six low E coated double-glazed units bonded into a simple stainless angle perimeter frame.

Each unit was comprised of 10mm clear toughened float glass on the top face and 13.5mm laminated toughened low E coated float glass on the underside; the top face of the glass was treated with an easy clean coating for low maintenance. Each unit was fully sealed and the cavity in between filled with argon gas.

Ion Glass was also responsible for the fabrication of the new stainless frame which was precisely manufactured and supplied fully powder coated to the owner’s choice of colour.

The rooflight was at second floor level, at the rear of the house so access was difficult. Ion used a mobile crane to lift the glass panels over the house and lower them individually into their correct position in the frame.

Related projects