Perfect glass in unique environments
Nickel Sulphide (NiS) inclusions are a well-known issue for toughened glass, resulting from the presence of nickel contaminants in the glass melt – at the point of original manufacture – reacting with sulphur, most likely from the furnace fuel. During thermal toughening – the normal glass toughening procedure used in the UK – these inclusions undergo a crystalline phase change to a smaller form and become fixed in place within the glass upon cooling.
Although not visible to the naked eye, over time the inclusions grow and can eventually impart sufficient additional stress into the glass panel to cause spontaneous failure.
Heat soak tested requires that the glass is heated to around 2900C and left for a sufficient length of time to fracture the panes which might otherwise suffer fracture in situ, thus minimising the risk after installation.
Is heat-soak testing worth the extra cost?
Heat soaked tested glass would normally display a kitemark noting that the glass has been toughened and heat-soak tested (HST) to European Standard EN14179.
Ion Glass specify heat-soak testing for all structural glass installations, especially overhead canopies and glass rooflights; glass screens; frameless or free-standing balustrading and bolt fixed glass structures. The slight increase in cost of this procedure is well worth it for the peace of mind that comes from reducing the risk of spontaneous glass failure to less than 5% and should be considered essential for any glass installation where breakage could result in injury.
Nickel-sulphide inclusion failure can be a costly repair: the only possible solution is to completely remove and replace the failed glass panel, however difficult or expensive it might be to carry out this process.
What does nickel-inclusion failure look like?
Spontaneous glass failure
Spontaneous glass failure as a result of nickel-sulphide inclusion creates a clear break pattern to the glass, with a distinctive double-D at the source of the break.
The failure is spontaneous, with the shattering of the glass spreading rapidly over the entire pane without any external impact damage.
Supporting with insurance claims
For insurance purposes it is often necessary to make a visual inspection of a shattered glass installation to establish whether the damage has been caused by impact, misuse, spontaneous nickel-inclusion failure or any other possible incident.
Ion Glass offer a consultancy service that includes a visit to the premises and the preparation of an independent report appropriate for submission to Insurance Companies or any other interested parties.




